Why Is the Coefficient of Static Friction μₛ = tan θ?

Why is the coefficient of static friction equal to tan θ?

In short: At the angle where the box just slips, the downslope pull mg sin θ equals the maximum static friction μₛ mg cos θ. The mg cancels, and sin θ ÷ cos θ = tan θ gives μₛ = tan θ. So measuring the slip angle alone gives μₛ, with no spring scale or force sensor.

Three common doubts

1. How is gravity split on the ramp? mg cos θ presses the box into the ramp and is balanced by the normal force, and mg sin θ drags it down the slope.

2. What does static friction do as the ramp gets steeper? The drag mg sin θ grows with the angle, while friction opposes it up to a limit of μₛ times the normal force, and that limit shrinks as the ramp steepens. At the slip angle the two are equal.

3. Does the mass of the box matter? No. mg cancels from both sides, so the slip angle depends only on the two surfaces. A slip at 26.6° means μₛ = 0.5, even if you triple the mass.

Want more AP Physics 1 help like this?


Equations & Traps: the AP Physics 1 equation deck. See Equations & Traps

AP Physics 1 Mind Maps: every topic on one page. See the Mind Maps

Complete and Continue